17 Key Factors While Installing Food Steamer Equipment

Key factors While Installing Food Steamer Equipment

Here is a summary of the key factors to keep in mind when sizing up a potential steam installation site:

  1. Your choice of steam equipment often is determined by the floor space, plumbing connections, and power sources available in your kitchen.

  2. Before installing, verify that the electrical supply agrees with the specifications on the data plate located on the back panel of the Steamer.

  3. If the supply and equipment requirements do not agree, do not proceed with the installation.

  4. Allow space for plumbing and electrical connections.

  5. Proper water quality can improve the taste of the food prepared in the steamer, reduce liming in the steam generator and extend equipment life.

  6. Minimum clearance is 6" (15.2 cm) on the back for proper air circulation.

  7. Allow adequate access for operating and servicing the steamer (36" at the front of the steamer, 15" (38 cm) above the steamer and 18" (45.7 cm) on right side of steamer).

  8. Most steamers require a floor drain for removing condensate from the cooking compartment and the boiler.

  9. Determine the water quality and provide for a water softener if needed.

  10. Floor drains in front of tilting pans and kettles help contain liquids that spill on the kitchen floor.

  11. Consult the manufacturer’s requirements for sizes of water inlets and drains.

  12. An air gap is recommended between the steam generator and floor drain.

  13. The floor drain should be located outside the perimeter of the equipment.

  14. This is to prevent the venting steam from rising and condensing on the unit’s electrical components.

  15. Look at your city or county ordinances for proper ventilation and fire suppression requirements for steam-operated equipment.

  16. Consider the proximity of electrical power to the equipment.

  17. Even if you’re using a gas-fired boiler, you may need electricity to power the appliance itself.

1 Like